Norco
Revolver 120C SE Gen 4
The fourth-generation Norco Revolver 120 is a dedicated cross-country platform engineered for modern, highly technical race courses and aggressive trail riding. Moving away from its historical Horst-link design, Norco transitions the Revolver to a flex-pivot rear suspension layout, shedding significant frame weight while maintaining an active suspension feel. The platform is built around a 120mm fork and 115mm of rear travel, utilizing a custom-tuned inline shock to balance pedaling support with small-bump compliance.
Aimed at riders who want race-day efficiency without sacrificing capability on steep or rough terrain, the Revolver 120 updates its chassis with contemporary standards like a threaded bottom bracket, UDH compatibility, and dual-bottle capacity on most sizes. It is a sharp, lightweight machine that prioritizes forward momentum but embraces the reality that modern cross-country riding often demands the descending composure of a short-travel trail bike.
Spec sheet.
Every component shipped with this build.
Geometry & fit.
5 sizes published.
Norco shapes the Revolver 120 around a thoroughly modern cross-country geometry that prioritizes stability without losing low-speed agility. The 66.5-degree head tube angle is notably slacker than previous iterations, pushing the front wheel further out to prevent the bike from feeling nervous on steep descents. This is paired with a roomy reach—measuring 472.5mm on a Size 3—giving the rider plenty of space to shift their weight during technical maneuvers.
To keep handling consistent across the size run, Norco employs size-specific geometry. As the frames get larger, the rear-center lengths grow proportionally and the seat tube angles steepen. This approach ensures that taller riders remain centered between the wheels, maintaining a powerful, forward-biased pedaling posture on steep climbs without the front wheel wandering.
The cockpit setup reinforces the bike's aggressive intentions. Across all builds, Norco specs a short 50mm stem paired with wide, low-rise handlebars. This combination keeps steering inputs direct and responsive, allowing riders to easily navigate tight switchbacks while maintaining leverage over the front end through rougher sections.
Where the handlebar sits relative to the bottom bracket — the single most important fit pair.
01Fit geometry6 values
02Component geometry4 values
03Handling geometry8 values
Which size should I buy?
Slide your height to see the recommended size. GearWise's fit algorithm works from the published stack, reach, and ETT — the brand's own recommendation may differ.
→Calculated from GearWise's own stack / reach / ETT algorithm — the brand's size chart may recommend a different size, and a proper bike fit beats any calculator.
The lineup.
3 builds, ranging $5,399 – $11,499.
The Revolver 120 lineup spans three carbon builds, all utilizing the same lightweight frame, threaded bottom bracket, and UDH compatibility. The entry point is the C2, which blends a Shimano XT Di2 rear derailleur with Deore-level drivetrain components and four-piston brakes. It relies on RockShox Select+ suspension and an alloy Stan's Arch D wheelset. While this build offers reliable shifting and braking, the heavier wheels mask some of the frame's inherent acceleration.
Stepping up to the C1 introduces a full Shimano XTR Di2 drivetrain, upgraded XT brakes, and RockShox Ultimate-tier suspension. Crucially, the C1 upgrades to a Zipp 1Zero HiTop S carbon wheelset, significantly reducing rotational weight and sharpening the bike's climbing response.
At the top of the ladder, the C SE represents a no-compromise race build. It features a SRAM XX SL Eagle AXS Transmission, SRAM Motive Ultimate four-piston brakes, and RockShox Flight Attendant automated suspension. Like the C1, it rolls on the Zipp carbon wheelset but swaps the standard dropper for a wireless RockShox Reverb AXS post. Across all models, Norco specs a Maxxis Rekon and Rekon Race tire combination, leaning heavily toward rolling speed.
From the press.
5 reviews from the cycling press.
Reviewers consistently praise the Revolver 120 for balancing sharp pedaling response with unexpected descending capability. The transition to a flex-pivot rear end is widely viewed as a success, yielding a bike that feels energetic under power but remains "nice and active at the top of its travel, aiding traction on technical climbs" (Flow Mountain Bike). Testers found that the custom shock tune provides enough mid-stroke support to push hard into corners, while the frame's low weight translates to immediate acceleration.
On rougher descents, the bike handles terrain that typically overwhelms short-travel platforms. One tester noted that the "dialed steering allowed me to slice through rough lines" (Cycling Magazine), maintaining composure on steep, rocky trails. However, its cross-country DNA remains apparent. While highly capable, the front end can exhibit "twitchy moments from the front end when the speeds pick up" (Theloamwolf) on truly aggressive downhill sections.
The primary critique centers on the stock components of the lower-tier builds. Testers observed that the heavier alloy wheelset on the C2 model dulls the frame's natural liveliness and "saps some momentum and impeded quick accelerations" (Flow Mountain Bike). Additionally, several reviewers found the stock Maxxis Rekon rear tire prone to slipping on loose hardpack, suggesting a tread upgrade for riders tackling demanding conditions.
Norco Revolver C1 120 review
2026 Norco Revolver 130 C2 Review | Reloaded XC ripper delivers fun in spades
Norco's New Revolver XC Bike | Release and First Ride
First Ride Review: 2026 Norco Revolver XC Bike
