Marin Lombard E E1 (Bosch SX INT)

Marin

Lombard EE1 (Bosch SX INT)

FrameAll-New Series 4 Beyond R…Marin Full Carbon w/ Tapere…
GroupsetShimano GRX STRX610, 12…Shimano CSM6100, 10-51T
WheelsMarin Aluminum Double W…Vee Tire Co., G-Sport, 700x…

The Marin Lombard E is Marin’s first electric drop-bar gravel bike, introduced for 2025 as an all-new platform rather than an electrified carryover of an older Lombard. It is built around a Series 4 Beyond Road E 6061 aluminum frame with a one-piece hydroformed downtube and motor mount, internal routing, flat-mount brakes, 142x12 mm rear spacing, and a full-carbon fork with a tapered steerer and 12 mm front axle. Across the range, the defining feature is Bosch’s Performance Line SX Sprint mid-drive paired with a 400 Wh Compact PowerTube, placing the bike in the lighter, lower-profile end of the e-gravel and e-urban crossover market rather than the heavier full-power touring segment.

What distinguishes the Lombard E is its emphasis on utility and composure over speed-first gravel performance. The geometry is notably conservative for a drop-bar gravel bike, with a 70° head angle, 435 mm chainstays, and a long wheelbase, and the frame includes rack, mudguard, and cargo mounts that broaden its use well beyond recreational gravel riding. This is an e-bike aimed at commuting, mixed-surface exploration, and light touring: a stable, practical platform with room for high-volume tires and everyday accessories, rather than a sharp-handling electric gravel racer.

Marin Lombard E
Build
Size
01 / Buy

Where to get it.

No retailers stocking size S.

Size
0 retailers · Size S

No retailers carrying size S right now.

02 / Specifications

Spec sheet.

Every component shipped with this build.

01Frameset
2 components
FrameAll-New Series 4 Beyond Road E, 6061 Aluminum, One-Piece Hydroformed Downtube & Motor Mount, Internal Cable Routing, Mudguard and Rack Mounts, Flat Mount Disc, 142x12mm Thru-Axle
ForkMarin Full Carbon w/ Tapered Steerer, 12mm Thru-Axle, Flat-Mount Disc, Fender Eyelets
02Drivetrain & brakes
10 components
CranksetForged Alloy, 42T Steel Chainring
Bottom bracketnull
Front rotor160mm
Rear rotor160mm
03Wheels & tires
4 components
Front wheelMarin Aluminum Double Wall, 25mm Inner, 18mm Tall, Disc Specific, Tubeless Compatible; Forged Aluminum Alloy, 100x12mm, Disc, 32H; 14g Black Stainless Steel
Rear wheelMarin Aluminum Double Wall, 25mm Inner, 18mm Tall, Disc Specific, Tubeless Compatible; Forged Aluminum Alloy, 142x12mm, Disc, 32H; 14g Black Stainless Steel
Front tireVee Tire Co., G-Sport, 700x44, Tubeless Compatible
Rear tireVee Tire Co., G-Sport, 700x44, Tubeless Compatible
04Cockpit & contact
5 components
StemMarin 3D Forged Alloy
HandlebarsMarin Butted Alloy, Compact 16º Flared Drop
SaddleMarin Beyond Road Concept Elite
SeatpostMarin Alloy, 27.2
Grips/TapeMarin Shock Absorbing Perforated Tape
03 / Geometry

Geometry & fit.

4 sizes published.

The geometry points clearly toward stability and an upright fit. Across sizes S to XL, the Lombard E uses a 70° head tube angle, 435 mm chainstays, and wheelbases from 1042.2 mm to 1109.6 mm; in size M, reach is 405 mm and stack is 583.5 mm, producing a notably tall front end. That stack-to-reach relationship creates a more relaxed rider position than many performance gravel bikes, reducing strain on the back and neck and making the bike easier to manage for commuting, long rides, and loaded use.

Handling follows directly from those numbers. The slack front end, long rear center, and 80 mm bottom bracket drop favor planted, predictable cornering rather than quick direction changes. On the road and smoother gravel, that should translate to calm tracking and good confidence at speed; in tighter turns or more technical terrain, it will feel slower to respond and require more rider input. Riders looking for a lively, race-oriented fit may find it conservative, but for all-road utility, touring, and everyday mixed-surface riding, the geometry is intentionally steady and forgiving.

Reach × Stack · size Smm

Where the handlebar sits relative to the bottom bracket — the single most important fit pair.

655610565520475STACK ↑335361388414440REACH →ENDURANCERACE / AEROSize S385 · 564.7
01Fit geometry6 values
Stack564.7 mm
Reach385 mm
Top tube552.2 mm
Headtube length130 mm
Standover height686.7 mm
Seat tube length460 mm
02Component geometry3 values
Crank length170 mm
Handlebar width440 mm
Stem length70 mm
03Handling geometry7 values
Headtube angle70°
Seat tube angle73.5°
BB height282 mm
BB drop80 mm
Offset50 mm
Wheelbase1042.2 mm
Chainstay length435 mm

Which size should I buy?

Slide your height to see the recommended size. GearWise's fit algorithm works from the published stack, reach, and ETT — the brand's own recommendation may differ.

Your height
5'8"173 cm
5'0"5'5"5'10"6'3"6'7"
Recommended sizeSBased on stack, reach & ETT for your height · score 72/100.

Calculated from GearWise's own stack / reach / ETT algorithm — the brand's size chart may recommend a different size, and a proper bike fit beats any calculator.

04 / Other builds

The lineup.

2 builds, ranging $4,299 – $5,299.

The Lombard E is offered in two builds, E1 and E2, both based around the same Bosch SX integrated drive system and the same core aluminum-frame/carbon-fork platform. That means the main buying decision is not motor performance but component level and feature refinement. The range structure suggests Marin is keeping the fundamental ride character and utility package consistent across both trims while using the higher model to add more premium equipment.

Review information on the E1 points to a practical, value-driven specification: mechanical Shimano GRX shifting, a 10-51 cassette, GRX hydraulic disc brakes with 160 mm rotors, and Marin-branded alloy cockpit and seatpost parts. That build was repeatedly framed as robust, low-maintenance, and appropriate for daily use. Reviewers also noted that the E2 adds higher-end touches, including Di2 shifting and a dropper post, making it the better option for riders who want more control off-road and a more polished control interface, while the E1 stands out as the pragmatic choice for commuters and tourers who care more about durability and price discipline than premium finishing kit.

01
E2 (Bosch SX INT) build
E2 (Bosch SX INT)
$5,299
02
E1 (Bosch SX INT) build
· Currently viewingE1 (Bosch SX INT)
$4,299On this page
05 / Reviews

From the press.

1 review from the cycling press.

Reviewers consistently describe the Lombard E as a stable, good-natured e-gravel bike that prioritizes confidence and everyday usefulness over agility. Rennrad-News called it "massig" and very track-stable, noting that it feels easy to ride and broadly at home across surfaces. The wide 460 mm handlebar on the tested size M, short cockpit dimensions, and generous tire volume were all cited as contributors to a secure feel, especially on forest paths, coarse gravel, and routine urban riding. The Bosch Performance Line SX Sprint motor was praised for delivering assistance in a natural, sporty way rather than overwhelming the ride, and the 42T chainring with 10-51 cassette was seen as a well-judged gearing choice for mixed use.

The main criticism is that the same qualities that make the bike calm also make it feel bulky and somewhat sluggish when ridden aggressively. Multiple observations point to a need for a deliberate steering input to initiate turns, and reviewers did not see it as a sporty specialist for technical gravel riding or dynamic accelerations. Comfort was also judged as adequate rather than standout: the aluminum frame was considered solid but stiff, with much of the vibration damping coming from the carbon fork and 44 mm tires rather than the chassis itself. Reviewers also noted that the mechanical GRX controls on the lower-spec bike are functional and reliable, but not as refined ergonomically as higher-end Di2 options.